EN / UK

Type Code Seach | *NOT READY*: #CODE

Keyword suggestions

Part number suggestions

Discontinued Products

Square HSS End Mills

Search by sub-category

359

Data to be displayed: 30; 45; 60

Sort by:

Shipping Days	All Same day 2 Days or Less 5 Days or Less 6 Days or Less 7 Days or Less 8 Days or Less 9 Days or Less 10 Days or Less 11 Days or Less 12 Days or Less

?* Information on days to ship and prices

1
2
3
4
5
Next >>

2-Flute General Use, Short EDS

OSG

High speed steel square series.
Tool material: Cobalt high speed steel, Working material: General steel/stainless steel/cast iron/aluminium/copper
Coating: Uncoated, Standard/Alteration category: Manufacturer's standard product, Number of flutes (pcs.): 2
Zerration angle: Standard helix (30 to 44°).

Volume Discount

Select to compare

› Configure now
Starting from^∗ ：	15.46 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Rough and Finish End Mills RFE

OSG

Rough under-finish end mill uses an unique trapezoidal blade shape that is capable of performing heavy cutting and finish cutting simultaneously. Nicks that are perpendicular to the axis and the flute strength helps withstand heavy cutting.

Volume Discount

Select to compare

› Configure now
Starting from^∗ ：	74.50 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

P-XαS P Coated X α Nick Short Blade

SANKO MFG

A semi-fine pitch type roughing end mill. Excellent chip discharge.

Select to compare

› Configure now
Starting from^∗ ：	56.78 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

TiCN Coated Powdered High-Speed Steel Square End Mill, 4-Flute, Short

MISUMI

Powdered HSS with high durability is available more cheaply than the cobalt HSS market price

Volume Discount

TiCN
4 Flutes
S (Short)

Select to compare

› Configure now
Starting from^∗ ：	15.03 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

XPM, Slim-Shank Fine-Pitch Type, VSS-XPM-RESF

OSG

Slim shank roughing end mills; shank diameter is 1 mm smaller than blade diameter. Can freely adjust the extension and length.

Volume Discount

Select to compare

› Configure now
Starting from^∗ ：	82.91 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

XPM, Long-Shank Short Fine-Pitch Type, VLS-XPM-RESF

OSG

V coating applied powder high speed XPM roughing. Flute with excellent chip control.

Volume Discount

Select to compare

› Configure now
Starting from^∗ ：	60.98 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Rough and Finish End Mills (Long Type) RFEL

OSG

Select to compare

› Configure now
Starting from^∗ ：	187.42 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

ALα Alpha Nick for Aluminum

SANKO MFG

Ideal for roughing aluminum material. Capable of machining grooves up to 1.5D.

[Features]
· Endmill dedicated to machining aluminum sashes.

Volume Discount

Select to compare

› Configure now
Starting from^∗ ：	43.20 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

V-WEML, HSS-Co end mill

OSG

HSS-Co end mill - Multiflute, long length of cut - Weldon shank

Select to compare

› Configure now
Starting from^∗ ：	30.70 €
Min. Shipping Days ：	2 Days

*Unit price with basic configuration

TiCN Coated Powdered High-Speed Steel Roughing End Mill, Short, Center Cut

MISUMI

Powdered HSS with high durability is available more cheaply than the cobalt HSS market price

Volume Discount

TiCN
4 Flutes
S (Short)

Select to compare

› Configure now
Starting from^∗ ：	24.74 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

TiCN Coated Powdered High-Speed Steel Roughing End Mill, Short, Long Shank, Center Cut

MISUMI

[Features]
-Long shank of high-speed steel powder expected to last a long time
-Coating with excellent lubricity is effective for wet machining and machining at cutting speeds of 40 m/min or less
-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.

Volume Discount

TiCN
3 Flutes
S (Short)

Select to compare

› Configure now
Starting from^∗ ：	43.62 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Powdered High-Speed Steel Square End Mill, 4-Flute / Regular / Non-Coated Model

MISUMI

[Features]
-Powdered high-speed steel, square, uncoated, long flute length, 4-flute type, which is expected to last a long time
-Suitable for milling deep cavities
-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, performance range, prices, etc.

Volume Discount

Non-Coated
4 Flutes
L (Long)

Select to compare

› Configure now
Starting from^∗ ：	20.83 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

High-Speed Steel Square End Mill, 2-Flute / Regular / Non-Coated Model

MISUMI

[Features]
-High-speed steel uncoated, square, normal blade length, 2-groove type with up to ø50
-Can be reground. Please refer to the "Regrinding Service" page for details on how to proceed, what services you can avail of, prices etc.

Volume Discount

Non-Coated
2 Flutes
R (Regular)

Select to compare

› Configure now
Starting from^∗ ：	9.13 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

High-Speed Steel Square End Mill, 4-Flute, Long / Non-Coated Model

MISUMI

[Features]
-Uncoated 4 flute design with long flute
-Effective for side milling with 40° helix angle stronger than standard helix angle
-Suitable for deep cavity milling
-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.

Volume Discount

Non-Coated
4 Flutes
L (Long)

Select to compare

› Configure now
Starting from^∗ ：	13.35 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

G Standard End Mill, 4-Flute 4GE

NACHI(FUJIKOSHI)

General-purpose coated end-mill that performs machining of workpiece materials from carbon steel and stainless steel to aluminum. Suitable for side surface processing.

Volume Discount

Select to compare

› Configure now
Starting from^∗ ：	33.36 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Super Hard, 4-Flute 4SE

NACHI(FUJIKOSHI)

General-purpose end-mill that performs machining of workpiece materials from carbon steel and stainless steel to aluminum. Suitable for side surface processing.

Volume Discount

Select to compare

› Configure now
Starting from^∗ ：	25.69 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

AG Mill, Roughing, Medium AGREM

NACHI(FUJIKOSHI)

Performs high efficiency coarse grooving of workpiece materials such as steel, stainless steel and aluminum. Fine pitch nick.

Select to compare

› Configure now
Starting from^∗ ：	85.54 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

SG-FAX Roughing End Mill, Regular Length, Short SGFRERS

NACHI(FUJIKOSHI)

Performs high efficiency coarse grooving of workpiece materials such as steel, stainless steel and aluminum. Fine pitch nick.

Volume Discount

Select to compare

› Configure now
Starting from^∗ ：	83.43 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Roughing End Mill Short SRE

NACHI(FUJIKOSHI)

Volume Discount

Select to compare

› Configure now
Starting from^∗ ：	49.89 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Roughing End Mill Long LRE

NACHI(FUJIKOSHI)

Select to compare

› Configure now
Starting from^∗ ：	98.09 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

2-Flute Long Shank Medium LS-EDN

OSG

Long shank, medium diameter, 2 flute cutter made of cobalt high speed steel as the base material. It can be used for machining long projections.

Volume Discount

Select to compare

› Configure now
Starting from^∗ ：	28.84 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

End Mill (Multi-Flute Center-Cutting Long Type), CC-EML

OSG

4-cutter end mill with centre cut in long design using cobalt high-speed steel as base material. Suitable for deep cuts.

Volume Discount

Select to compare

› Configure now
Starting from^∗ ：	19.92 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

XPM End Mill (Multi-Flute Short Type), XPM-EMS

OSG

4-flute short end mill with powder metal high-speed steel XPM as base material.

Volume Discount

Select to compare

› Configure now
Starting from^∗ ：	25.03 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

XPM End Mill (Multi-Flute Long Type), XPM-EML

OSG

Multi-flute end mill in long version made of powder metal high-speed steel XPM as basic material. Suitable for deep cuts.

Volume Discount

Select to compare

› Configure now
Starting from^∗ ：	30.34 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

End Mill (2-Flute Short Type for Aluminum), AL-EDS

OSG

Short 2-flute cutter for aluminium alloys using cobalt high-speed steel as base material.

Volume Discount

Select to compare

› Configure now
Starting from^∗ ：	16.82 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

XPM High Helix, with Nick, Short Type, V-XPM-NHS

OSG

Chips are suitable separated by nicks. Demonstrates outstanding effectiveness in groove roughing of stainless steel and other workpieces.

Select to compare

› Configure now
Starting from^∗ ：	46.36 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

End Mill (Roughing Medium Type), EX-REEN

OSG

Centre cutting series of heavy duty roughing cutters
Tool material: Cobalt high speed steel, Work material: General steel/stainless steel/cast iron/aluminium/copper
Coating: Uncoated, Standard/ageing category: Manufacturer's standard product, Helix angle: Standard helix (30 to 44°).

Volume Discount

Select to compare

› Configure now
Starting from^∗ ：	36.19 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

WXL Coated End Mill (Roughing Medium Type) WH-REEN

OSG

High-speed steel roughing end mills of next generation. For both dry and wet machining.

Volume Discount

Select to compare

› Configure now
Starting from^∗ ：	52.67 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

WXL Coated End Mill (Roughing Long Fine-Pitch Type), WH-RELF

OSG

High-speed steel roughing end mills of next generation. For both dry and wet machining.

Volume Discount

Select to compare

› Configure now
Starting from^∗ ：	72.70 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

TIN Coated (Roughing Short Fine Pitch Shape) EX-LS-RESF

OSG

TiN-coated roughing cutter for heavy machining with long shank and fine pitch.

Select to compare

› Configure now
Starting from^∗ ：	38.55 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

WXL Coated End Mill (Roughing Long Type), WH-REEL

OSG

High-speed steel roughing end mills of next generation. For both dry and wet machining.

Volume Discount

Select to compare

› Configure now
Starting from^∗ ：	72.70 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

CPM End Mill (Roughing, Fine-Pitch Type, Silent Type) SI-WH-RESF

OSG

[Features]
・ Achieves "quiet heavy-duty cutting" with unequal flute spacing of the bottom flute and unequal lead shape of the outer edge.

Volume Discount

Select to compare

› Configure now
Starting from^∗ ：	50.67 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

3S End Mill, 2-Flute (Standard Blade)

FUKUDA

Wide range of blade lengths and an abundance of sizes

Volume Discount

Select to compare

› Configure now
Starting from^∗ ：	24.88 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

End Mill for Keyway (Positive Tolerance)

FUKUDA

Endmill dedicated for key groove machining. Positive blade diameter tolerance. A straight shank.

Volume Discount

Select to compare

› Configure now
Starting from^∗ ：	33.96 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

P-XαM P Coated X α Nick Regular Blade

SANKO MFG

[Features]
· A semi-fine pitch type P-XαS roughing end mill.
· Excellent chip discharge.
· Enables a wide range of machining applications, due to the regular flute.

Select to compare

› Configure now
Starting from^∗ ：	72.21 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

S-FPαS S-Coated Fine Pitch Short Blade

SANKO MFG

Fine pitch type roughing endmill with TiCN coating. Machining allowance can be reduced when performing finish machining.

Select to compare

› Configure now
Starting from^∗ ：	63.99 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

α H α Nick Hard Type

SANKO MFG

A hard pitch type roughing end mill. Ideal for heavy duty groove cutting.

Volume Discount

Select to compare

› Configure now
Starting from^∗ ：	39.36 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

SM Straight Shank for Key Grooves

SANKO MFG

Endmill dedicated for key groove machining. The outer diameter tolerance is positive.

Volume Discount

Select to compare

› Configure now
Starting from^∗ ：	21.94 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Slotting End Mill SLE

DAIICHITOOL

[Features]
-2 blades made of HSS.
Machining material: general steel / cast iron / aluminium / copper
Standard/modification rating: manufacturer's standard product
No. of blades (pcs.): 2.

Volume Discount

Select to compare

› Configure now
Starting from^∗ ：	22.05 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

V-WREES, HSS-Co end mill

OSG

HSS-Co end mill - Multiflute, for roughing, short length of cut - Weldon shank

Select to compare

› Configure now
Starting from^∗ ：	35.30 €
Min. Shipping Days ：	2 Days

*Unit price with basic configuration

V-WRESF, HSS-Co end mill

OSG

HSS-Co end mill - Multiflute, for roughing, short length of cut - Weldon shank

Select to compare

› Configure now
Starting from^∗ ：	35.30 €
Min. Shipping Days ：	2 Days

*Unit price with basic configuration

V-WEDS, HSS-Co end mill

OSG

HSS-Co end mill - 2 flutes, square, short length of cut - Weldon shank

Select to compare

› Configure now
Starting from^∗ ：	20.40 €
Min. Shipping Days ：	2 Days

*Unit price with basic configuration

V-WEMS, HSS-Co end mill

OSG

HSS-Co end mill - Multiflute, short length of cut - Weldon shank

Select to compare

› Configure now
Starting from^∗ ：	23.10 €
Min. Shipping Days ：	2 Days

*Unit price with basic configuration

AS Coated Powdered High-Speed Steel Roughing End Mill, 45° Spiral / Short, Center Cut

MISUMI

The combination of AS coating and 45° helix achieves the astonishing durability for everything from general steel to stainless steel!

Volume Discount

AS
4 Flutes
S (Short)

Select to compare

› Configure now
Starting from^∗ ：	38.64 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

AS Coated Powdered High-Speed Steel Roughing End Mill, 45° Spiral / Regular, Center Cut

MISUMI

The combination of AS coating and 45° helix achieves the astonishing durability for everything from general steel to stainless steel!

Volume Discount

AS
4 Flutes
R (Regular)

Select to compare

› Configure now
Starting from^∗ ：	43.35 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration


Brand
Product Series
Starting from^∗
Min. Shipping Days
Specifications
Blade diameter (D)(φ)
Blade length (ℓ)(mm)
work material
Blade shape type
Number of flutes(sheet)
Tool Material Type
Machining Application
Shank diameter (d)(mm)
Coating
Overall Length (L)(mm)
Torsion Angle (θ)
Base Blade Y/N
Underneck length (ℓ1)(mm)
shank

	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare
Brand	OSG	OSG	SANKO MFG	MISUMI	OSG	OSG	OSG	SANKO MFG	OSG	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	FUKUDA	FUKUDA	SANKO MFG	SANKO MFG	SANKO MFG	SANKO MFG	DAIICHITOOL	OSG	OSG	OSG	OSG	MISUMI	MISUMI
Product Series	2-Flute General Use, Short EDS	Rough and Finish End Mills RFE	P-XαS P Coated X α Nick Short Blade	TiCN Coated Powdered High-Speed Steel Square End Mill, 4-Flute, Short	XPM, Slim-Shank Fine-Pitch Type, VSS-XPM-RESF	XPM, Long-Shank Short Fine-Pitch Type, VLS-XPM-RESF	Rough and Finish End Mills (Long Type) RFEL	ALα Alpha Nick for Aluminum	V-WEML, HSS-Co end mill	TiCN Coated Powdered High-Speed Steel Roughing End Mill, Short, Center Cut	TiCN Coated Powdered High-Speed Steel Roughing End Mill, Short, Long Shank, Center Cut	Powdered High-Speed Steel Square End Mill, 4-Flute / Regular / Non-Coated Model	High-Speed Steel Square End Mill, 2-Flute / Regular / Non-Coated Model	High-Speed Steel Square End Mill, 4-Flute, Long / Non-Coated Model	G Standard End Mill, 4-Flute 4GE	Super Hard, 4-Flute 4SE	AG Mill, Roughing, Medium AGREM	SG-FAX Roughing End Mill, Regular Length, Short SGFRERS	Roughing End Mill Short SRE	Roughing End Mill Long LRE	2-Flute Long Shank Medium LS-EDN	End Mill (Multi-Flute Center-Cutting Long Type), CC-EML	XPM End Mill (Multi-Flute Short Type), XPM-EMS	XPM End Mill (Multi-Flute Long Type), XPM-EML	End Mill (2-Flute Short Type for Aluminum), AL-EDS	XPM High Helix, with Nick, Short Type, V-XPM-NHS	End Mill (Roughing Medium Type), EX-REEN	WXL Coated End Mill (Roughing Medium Type) WH-REEN	WXL Coated End Mill (Roughing Long Fine-Pitch Type), WH-RELF	TIN Coated (Roughing Short Fine Pitch Shape) EX-LS-RESF	WXL Coated End Mill (Roughing Long Type), WH-REEL	CPM End Mill (Roughing, Fine-Pitch Type, Silent Type) SI-WH-RESF	3S End Mill, 2-Flute (Standard Blade)	End Mill for Keyway (Positive Tolerance)	P-XαM P Coated X α Nick Regular Blade	S-FPαS S-Coated Fine Pitch Short Blade	α H α Nick Hard Type	SM Straight Shank for Key Grooves	Slotting End Mill SLE	V-WREES, HSS-Co end mill	V-WRESF, HSS-Co end mill	V-WEDS, HSS-Co end mill	V-WEMS, HSS-Co end mill	AS Coated Powdered High-Speed Steel Roughing End Mill, 45° Spiral / Short, Center Cut	AS Coated Powdered High-Speed Steel Roughing End Mill, 45° Spiral / Regular, Center Cut
Starting from^∗	15.46 € *Unit price with basic configuration Volume Discount	74.50 € *Unit price with basic configuration Volume Discount	56.78 € *Unit price with basic configuration	15.03 € *Unit price with basic configuration Volume Discount	82.91 € *Unit price with basic configuration Volume Discount	60.98 € *Unit price with basic configuration Volume Discount	187.42 € *Unit price with basic configuration	43.20 € *Unit price with basic configuration Volume Discount	30.70 € *Unit price with basic configuration	24.74 € *Unit price with basic configuration Volume Discount	43.62 € *Unit price with basic configuration Volume Discount	20.83 € *Unit price with basic configuration Volume Discount	9.13 € *Unit price with basic configuration Volume Discount	13.35 € *Unit price with basic configuration Volume Discount	33.36 € *Unit price with basic configuration Volume Discount	25.69 € *Unit price with basic configuration Volume Discount	85.54 € *Unit price with basic configuration	83.43 € *Unit price with basic configuration Volume Discount	49.89 € *Unit price with basic configuration Volume Discount	98.09 € *Unit price with basic configuration	28.84 € *Unit price with basic configuration Volume Discount	19.92 € *Unit price with basic configuration Volume Discount	25.03 € *Unit price with basic configuration Volume Discount	30.34 € *Unit price with basic configuration Volume Discount	16.82 € *Unit price with basic configuration Volume Discount	46.36 € *Unit price with basic configuration	36.19 € *Unit price with basic configuration Volume Discount	52.67 € *Unit price with basic configuration Volume Discount	72.70 € *Unit price with basic configuration Volume Discount	38.55 € *Unit price with basic configuration	72.70 € *Unit price with basic configuration Volume Discount	50.67 € *Unit price with basic configuration Volume Discount	24.88 € *Unit price with basic configuration Volume Discount	33.96 € *Unit price with basic configuration Volume Discount	72.21 € *Unit price with basic configuration	63.99 € *Unit price with basic configuration	39.36 € *Unit price with basic configuration Volume Discount	21.94 € *Unit price with basic configuration Volume Discount	22.05 € *Unit price with basic configuration Volume Discount	35.30 € *Unit price with basic configuration	35.30 € *Unit price with basic configuration	20.40 € *Unit price with basic configuration	23.10 € *Unit price with basic configuration	38.64 € *Unit price with basic configuration Volume Discount	43.35 € *Unit price with basic configuration Volume Discount
Min. Shipping Days	Same day	6 Days	6 Days	5 Days	6 Days	6 Days	6 Days	Same day	2 Days	5 Days	5 Days	5 Days	5 Days	5 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	Same day	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	Same day	6 Days	6 Days	6 Days	6 Days	6 Days	8 Days	2 Days	2 Days	2 Days	2 Days	5 Days	5 Days
Specifications				TiCN 4 Flutes S (Short)						TiCN 4 Flutes S (Short)	TiCN 3 Flutes S (Short)	Non-Coated 4 Flutes L (Long)	Non-Coated 2 Flutes R (Regular)	Non-Coated 4 Flutes L (Long)																														AS 4 Flutes S (Short)	AS 4 Flutes R (Regular)
Blade diameter (D)(φ)	0.45 ～ 60	12 ～ 50	5 ～ 50	3 ～ 25	10 ～ 25	6 ～ 50	20 ～ 50	6 ～ 40	-	6 ～ 32	6 ～ 30	3 ～ 25	1 ～ 25	3 ～ 40	2.5 ～ 50	2.5 ～ 50	6 ～ 50	6 ～ 50	6 ～ 50	12 ～ 50	10 ～ 40	3 ～ 40	2 ～ 40	3 ～ 40	1.5 ～ 30	6 ～ 30	6 ～ 50	6 ～ 40	10 ～ 40	6 ～ 50	10 ～ 40	6 ～ 30	0.8 ～ 100	3 ～ 30	5 ～ 40	5 ～ 50	5 ～ 50	3 ～ 25	1 ～ 23	-	-	-	-	6 ～ 30	6 ～ 30
Blade length (ℓ)(mm)	1.1 ～ 80	40 ～ 120	10 ～ 80	8 ～ 45	22 ～ 45	11 ～ 75	106 ～ 212	15 ～ 65	-	13 ～ 53	11 ～ 45	15 ～ 90	3.5 ～ 60	15 ～ 110	7 ～ 70	7 ～ 70	16 ～ 112	15 ～ 70	15 ～ 70	55 ～ 140	25 ～ 65	15 ～ 110	8 ～ 65	15 ～ 110	4 ～ 55	15 ～ 55	16 ～ 112	16 ～ 95	45 ～ 125	11 ～ 75	45 ～ 125	13 ～ 45	2 ～ 80	5 ～ 30	15 ～ 100	10 ～ 80	8 ～ 75	5 ～ 25	3 ～ 30	-	-	-	-	13 ～ 45	19 ～ 68
work material	General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○]	General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[◎] / Copper[○]	General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[◎] / Copper[○]	General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Aluminum[◎]	-	General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Aluminum[◎] / Copper[○] / Resin[○]	General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	General Steel[◎] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	General Steel[◎] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[◎] / Copper[○]	Cast Iron[○] / Aluminum[○] / Resin[○] / Other[○] / Other 2[○] / Other 3[○] / Other 4[○]	Cast Iron[○] / Aluminum[○] / Resin[○] / Other[○] / Other 2[○] / Other 3[○] / Other 4[○]	General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○]	General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○]	General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○]	General Steel[○] / Quenched and tempered steel[○] / Aluminum[○]	General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	-	-	-	-	General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]
Blade shape type	Square	Roughing	Roughing	Square	Roughing	Roughing	Roughing	Roughing	-	Roughing	Roughing	Square	Square	Square	Square	Square	Roughing	Roughing	Roughing	Roughing	Square	Square	Square	Square	Square	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Square	For Keyway	Roughing	Roughing	Roughing	Square	Square	-	-	-	-	Roughing	Roughing
Number of flutes(sheet)	2	4 ～ 8	4 ～ 6	4	4 ～ 5	3 ～ 6	4 ～ 6	3 ～ 4	-	3 ～ 6	3 ～ 4	4	2	4	4	4	4 ～ 6	3 ～ 6	4 ～ 6	4 ～ 6	2	4	4	4	2	3 ～ 4	4 ～ 6	4 ～ 6	4 ～ 6	3 ～ 6	4 ～ 6	4 ～ 6	2	2	4 ～ 6	4 ～ 6	4 ～ 6	2	2	-	-	-	-	3 ～ 5	3 ～ 5
Tool Material Type	Cobalt HSS	Cobalt HSS	Cobalt HSS	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Cobalt HSS	Cobalt HSS	-	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Alloy HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Powder high-speed steel	Powder high-speed steel	Cobalt HSS	Powder high-speed steel	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Powder high-speed steel	Alloy HSS	Alloy HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	High-speed steel	-	-	-	-	Powder high-speed steel	Powder high-speed steel
Machining Application	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Countersinking	Plane / Side / Groove	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Groove	Side / Groove	-	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Side / Groove	Side / Groove	Side / Groove	Side / Groove	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Groove	Plane / Side / Groove	Plane / Side / Groove	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Groove	Plane / Side / Inclined Cuts	Plane / Side / Groove / Plunging (Z feed)	Other	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Groove	-	-	-	-	-	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts
Shank diameter (d)(mm)	6 ～ 42	12 ～ 42	6 ～ 42	6 ～ 25	9 ～ 24	6 ～ 42	20 ～ 42	6 ～ 32	-	6 ～ 32	6 ～ 25	6 ～ 25	6 ～ 25	6 ～ 32	6 ～ 42	6 ～ 42	6 ～ 42	6 ～ 42	6 ～ 42	12 ～ 42	10 ～ 32	6 ～ 32	6 ～ 32	6 ～ 32	6 ～ 25	8 ～ 32	6 ～ 42	6 ～ 32	10 ～ 32	6 ～ 42	10 ～ 32	6 ～ 25	6 ～ 42	6 ～ 25	6 ～ 32	6 ～ 42	6 ～ 42	6 ～ 25	4 ～ 20	-	-	-	-	6 ～ 25	6 ～ 25
Coating	Non-Coated	Non-Coated	For General Steels (AlCrN, etc.)	TiCN	-	-	Non-Coated	Non-Coated	-	TiCN	TiCN	Non-Coated	Non-Coated	Non-Coated	TiN	Non-Coated	AG	TiCN	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	-	Non-Coated	-	-	TiN	-	-	Non-Coated	Non-Coated	For General Steels (AlCrN, etc.)	TiCN	Non-Coated	Non-Coated	-	-	-	-	-	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)
Overall Length (L)(mm)	45 ～ 170	90 ～ 210	70 ～ 200	52 ～ 121	100 ～ 160	80 ～ 210	180 ～ 315	70 ～ 185	-	57 ～ 133	80 ～ 160	60 ～ 160	45 ～ 130	60 ～ 195	50 ～ 160	50 ～ 160	80 ～ 220	60 ～ 160	60 ～ 160	105 ～ 250	125 ～ 235	60 ～ 195	55 ～ 165	65 ～ 210	45 ～ 125	65 ～ 150	60 ～ 214	80 ～ 200	100 ～ 220	80 ～ 210	100 ～ 220	80 ～ 160	42 ～ 180	50 ～ 100	80 ～ 220	70 ～ 200	55 ～ 165	50 ～ 95	27 ～ 85	-	-	-	-	57 ～ 121	63 ～ 144
Torsion Angle (θ)	Standard Helix (30˚ to 40˚)	Weak torsion (15˚ to 25˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Weak torsion (15˚ to 25˚)	Weak torsion (15˚ to 25˚)	Standard Helix (30˚ to 40˚)	-	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	High Helix (45˚ to 60˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Weak torsion (15˚ to 25˚)	Standard Helix (30˚ to 40˚)	Weak torsion (15˚ to 25˚)	Standard Helix (30˚ to 40˚)	Other	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Weak torsion (15˚ to 25˚)	-	-	-	-	-	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)
Base Blade Y/N	-	-	Available	Available	-	-	-	Available	-	Available	Available	Available	Available	Available	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	Available	Available	Available	Available	Available	Available	Available	-	-	-	-	-	Available	Available
Underneck length (ℓ1)(mm)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	53 ～ 112	-	-	-	-	-	-	-	-	-	-	-	-	-	-	50 ～ 70	-	-	-	-	-	-	-	-	-	-	-	-	-
shank	Straight	Straight	-	-	Straight	Straight	Straight	-	-	-	-	-	-	-	-	-	-	-	-	-	Straight	Straight	Straight	Straight	Straight	Straight	Straight	Straight	Straight	Straight	Straight	Straight	-	-	-	-	-	-	Straight	-	-	-	-	-	-

1
2
3
4
5
Next >>

Filter by:

Stock

- Show only stock items
Clear

Blade diameter (D)(φ)
- 0.45～0.95
  - 0.45
  - 0.8
  - 0.9
  - 0.95
- 1～1.9
  - 1
  - 1/2
  - 1.05
  - 1.1
  - 1.2
  - 1.3
  - 1.4
  - 1.5
  - 1.59
  - 1.6
  - 1.7
  - 1.8
  - 1.9
- 2～2.9
  - 2
  - 2.1
  - 2.2
  - 2.3
  - 2.38
  - 2.4
  - 2.5
  - 2.6
  - 2.7
  - 2.8
  - 2.9
- 3～3.97
  - 3
  - 3/4
  - 3.1
  - 3.18
  - 3.2
  - 3.3
  - 3.4
  - 3.5
  - 3.6
  - 3.7
  - 3.8
  - 3.9
  - 3.97
- 4～4.9
  - 4
  - 4.1
  - 4.2
  - 4.3
  - 4.4
  - 4.5
  - 4.6
  - 4.7
  - 4.76
  - 4.8
  - 4.9
- 5～5.9
  - 5
  - 5/8
  - 5.1
  - 5.2
  - 5.3
  - 5.4
  - 5.5
  - 5.56
  - 5.6
  - 5.7
  - 5.8
  - 5.9
- 6～6.9
  - 6
  - 6.05
  - 6.1
  - 6.2
  - 6.3
  - 6.35
  - 6.4
  - 6.5
  - 6.6
  - 6.7
  - 6.8
  - 6.9
- 7～7.94
  - 7
  - 7/8
  - 7.1
  - 7.2
  - 7.3
  - 7.4
  - 7.5
  - 7.6
  - 7.7
  - 7.8
  - 7.9
  - 7.94
- 8～8.9
  - 8
  - 8.1
  - 8.2
  - 8.3
  - 8.4
  - 8.5
  - 8.6
  - 8.7
  - 8.8
  - 8.9
- 9～9.9
  - 9
  - 9.1
  - 9.2
  - 9.3
  - 9.4
  - 9.5
  - 9.53
  - 9.6
  - 9.7
  - 9.8
  - 9.9
- 10～10.9
  - 10
  - 10.1
  - 10.2
  - 10.3
  - 10.4
  - 10.5
  - 10.6
  - 10.7
  - 10.8
  - 10.9
- 11～11.9
  - 11
  - 11.1
  - 11.11
  - 11.2
  - 11.3
  - 11.4
  - 11.5
  - 11.6
  - 11.7
  - 11.8
  - 11.9
- 12～12.9
  - 12
  - 12.1
  - 12.2
  - 12.3
  - 12.4
  - 12.5
  - 12.6
  - 12.7
  - 12.8
  - 12.9
- 13～13.9
  - 13
  - 13.1
  - 13.2
  - 13.3
  - 13.4
  - 13.5
  - 13.6
  - 13.7
  - 13.8
  - 13.9
- 14～14.9
  - 14
  - 14.1
  - 14.2
  - 14.29
  - 14.3
  - 14.4
  - 14.5
  - 14.6
  - 14.7
  - 14.8
  - 14.9
- 15～15.9
  - 15
  - 15.1
  - 15.2
  - 15.3
  - 15.4
  - 15.5
  - 15.6
  - 15.7
  - 15.8
  - 15.88
  - 15.9
- 16～16.9
  - 16
  - 16.1
  - 16.2
  - 16.3
  - 16.4
  - 16.5
  - 16.6
  - 16.7
  - 16.8
  - 16.9
- 17～17.9
  - 17
  - 17.1
  - 17.2
  - 17.3
  - 17.4
  - 17.46
  - 17.5
  - 17.6
  - 17.7
  - 17.8
  - 17.9
- 18～18.9
  - 18
  - 18.1
  - 18.2
  - 18.3
  - 18.4
  - 18.5
  - 18.6
  - 18.7
  - 18.8
  - 18.9
- 19～19.9
  - 19
  - 19.05
  - 19.1
  - 19.2
  - 19.3
  - 19.4
  - 19.5
  - 19.6
  - 19.7
  - 19.8
  - 19.9
- 20～20.9
  - 20
  - 20.1
  - 20.2
  - 20.3
  - 20.4
  - 20.5
  - 20.6
  - 20.64
  - 20.7
  - 20.8
  - 20.9
- 21～21.9
  - 21
  - 21.1
  - 21.2
  - 21.3
  - 21.4
  - 21.5
  - 21.6
  - 21.7
  - 21.8
  - 21.9
- 22～22.9
  - 22
  - 22.1
  - 22.2
  - 22.23
  - 22.3
  - 22.4
  - 22.5
  - 22.6
  - 22.7
  - 22.8
  - 22.9
- 23～23.9
  - 23
  - 23.1
  - 23.2
  - 23.3
  - 23.4
  - 23.5
  - 23.6
  - 23.7
  - 23.8
  - 23.81
  - 23.9
- 24～24.9
  - 24
  - 24.1
  - 24.2
  - 24.3
  - 24.4
  - 24.5
  - 24.6
  - 24.7
  - 24.8
  - 24.9
- 25～25.9
  - 25
  - 25.1
  - 25.2
  - 25.3
  - 25.4
  - 25.5
  - 25.6
  - 25.7
  - 25.8
  - 25.9
- 26～26.9
  - 26
  - 26.1
  - 26.2
  - 26.3
  - 26.4
  - 26.5
  - 26.6
  - 26.7
  - 26.8
  - 26.9
- 27～27.9
  - 27
  - 27.1
  - 27.2
  - 27.3
  - 27.4
  - 27.5
  - 27.6
  - 27.7
  - 27.8
  - 27.9
- 28～28.9
  - 28
  - 28.1
  - 28.2
  - 28.3
  - 28.4
  - 28.5
  - 28.6
  - 28.7
  - 28.8
  - 28.9
- 29～29.9
  - 29
  - 29.1
  - 29.2
  - 29.3
  - 29.4
  - 29.5
  - 29.6
  - 29.7
  - 29.8
  - 29.9
- 30～30.9
  - 30
  - 30.1
  - 30.2
  - 30.3
  - 30.4
  - 30.5
  - 30.6
  - 30.7
  - 30.8
  - 30.9
- 31～31.9
  - 31
  - 31.1
  - 31.2
  - 31.3
  - 31.4
  - 31.5
  - 31.6
  - 31.7
  - 31.75
  - 31.8
  - 31.9
- 32～32.9
  - 32
  - 32.1
  - 32.2
  - 32.3
  - 32.4
  - 32.5
  - 32.6
  - 32.7
  - 32.8
  - 32.9
- 33～33.9
  - 33
  - 33.1
  - 33.2
  - 33.3
  - 33.4
  - 33.5
  - 33.6
  - 33.7
  - 33.8
  - 33.9
- 34～34.9
  - 34
  - 34.1
  - 34.2
  - 34.3
  - 34.4
  - 34.5
  - 34.6
  - 34.7
  - 34.8
  - 34.9
- 35～35.9
  - 35
  - 35.1
  - 35.2
  - 35.3
  - 35.4
  - 35.5
  - 35.6
  - 35.7
  - 35.8
  - 35.9
- 36～36.9
  - 36
  - 36.1
  - 36.2
  - 36.3
  - 36.4
  - 36.5
  - 36.6
  - 36.7
  - 36.8
  - 36.9
- 37～37.9
  - 37
  - 37.1
  - 37.2
  - 37.3
  - 37.4
  - 37.5
  - 37.6
  - 37.7
  - 37.8
  - 37.9
- 38～38.9
  - 38
  - 38.1
  - 38.2
  - 38.3
  - 38.4
  - 38.5
  - 38.6
  - 38.7
  - 38.8
  - 38.9
- 39～39.9
  - 39
  - 39.1
  - 39.2
  - 39.3
  - 39.4
  - 39.5
  - 39.6
  - 39.7
  - 39.8
  - 39.9
- 40～40.9
  - 40
  - 40.1
  - 40.2
  - 40.3
  - 40.4
  - 40.5
  - 40.6
  - 40.7
  - 40.8
  - 40.9
- 41～41.9
  - 41
  - 41.1
  - 41.2
  - 41.3
  - 41.4
  - 41.5
  - 41.6
  - 41.7
  - 41.8
  - 41.9
- 42～42.9
  - 42
  - 42.1
  - 42.2
  - 42.3
  - 42.4
  - 42.5
  - 42.6
  - 42.7
  - 42.8
  - 42.9
- 43～43.9
  - 43
  - 43.1
  - 43.2
  - 43.3
  - 43.4
  - 43.5
  - 43.6
  - 43.7
  - 43.8
  - 43.9
- 44～44.9
  - 44
  - 44.1
  - 44.2
  - 44.3
  - 44.4
  - 44.5
  - 44.6
  - 44.7
  - 44.8
  - 44.9
- 45～45.5
  - 45
  - 45.5
- 46～46.5
  - 46
  - 46.5
- 47～47.5
  - 47
  - 47.5
- 48～48.5
  - 48
  - 48.5
- 49～49.5
  - 49
  - 49.5
- 50～50.8
  - 50
  - 50.5
  - 50.8
- 51
- 52
- 53
- 54
- 55
- 56
- 57
- 58
- 59
- 60
- 61
- 62
- 63
- 64
- 65
- 66
- 67
- 68
- 69
- 70
- 71
- 72
- 73
- 74
- 75
- 76
- 77
- 78
- 79
- 80
- 85
- 90
- 95
- 100
[2.7-3/0.01φ Unit(s)][3.15-3.5/0.01φ Unit(s)][3.6-4/0.01φ Unit(s)][4.05-16/0.01φ Unit(s)][17-19.99/0.01φ Unit(s)][20.01-22.99/0.01φ Unit(s)][24-25/0.01φ Unit(s)]

Drawing

Clear

Blade length (ℓ)(mm)
1.1

1.6

1.8

2

2.2

2.5

3

3.5

4

4.5

5

5.5

6

6.5

7

7.5

8

9

10

10.5

11

12

13

14

15

16

17

18

19

20

22

23

24

25

26

27

28

30

32

33

34

35

36

38

39

40

45

48

50

53

55

56

58

60

63

65

67

68

70

75

80

85

90

95

100

105

106

110

112

115

120

122

125

130

140

145

150

160

180

200

212

250

300
Drawing

Clear

work material
- General Steel
- Quenched and tempered steel
- High Hardness Steel
- Stainless Steel
- Cast Iron
- Aluminum
- Titanium
- Copper
- Resin
- Other
- Other 2
- Other 3
- Other 4
Details

Clear

Blade shape type
Clear

Number of flutes(sheet)
1

2

3

4

5

6

8

10

12

14

16

18
Clear

Tool Material Type
Details

Clear

Machining Application
- Plane
- Side
- Groove
- Plunging (Z feed)
- Inclined Cuts
- Countersinking
- Other
Images

Clear

Shank diameter (d)(mm)
4

5

BS5

6

7

8

9

10

11

12

15

16

19

20

24

25

32

42
Drawing

Clear

Coating
Details

Clear

Overall Length (L)(mm)
- 27
- 31～38
  - 31
  - 35
  - 38
- 40～48
  - 40
  - 42
  - 45
  - 46
  - 48
- 50～59
  - 50
  - 51
  - 52
  - 53
  - 54
  - 55
  - 56
  - 57
  - 58
  - 59
- 60～69
  - 60
  - 62
  - 63
  - 64
  - 65
  - 66
  - 67
  - 68
  - 69
- 70～79
  - 70
  - 72
  - 73
  - 74
  - 75
  - 76
  - 77
  - 78
  - 79
- 80～89
  - 80
  - 82
  - 83
  - 84
  - 85
  - 86
  - 88
  - 89
- 90～97
  - 90
  - 91
  - 92
  - 95
  - 97
- 100～108
  - 100
  - 101
  - 102
  - 104
  - 105
  - 108
- 110～119
  - 110
  - 115
  - 116
  - 119
- 120～127
  - 120
  - 121
  - 122
  - 123
  - 124
  - 125
  - 127
- 130～137
  - 130
  - 132
  - 133
  - 134
  - 135
  - 137
- 140～149
  - 140
  - 141
  - 142
  - 143
  - 144
  - 145
  - 147
  - 149
- 150～155
  - 150
  - 154
  - 155
- 160～169
  - 160
  - 162
  - 165
  - 166
  - 169
- 170～178
  - 170
  - 173
  - 175
  - 177
  - 178
- 180～189
  - 180
  - 182
  - 183
  - 184
  - 185
  - 186
  - 188
  - 189
- 190～198
  - 190
  - 191
  - 193
  - 195
  - 197
  - 198
- 200～208
  - 200
  - 202
  - 203
  - 205
  - 208
- 210～215
  - 210
  - 213
  - 214
  - 215
- 220～227
  - 220
  - 222
  - 224
  - 225
  - 227
- 230～235.5
  - 230
  - 233
  - 235
  - 235.5
- 240～245.5
  - 240
  - 245
  - 245.5
- 250～255
  - 250
  - 250.5
  - 252
  - 253
  - 255
- 260～265
  - 260
  - 265
- 270～275
  - 270
  - 275
- 280～288
  - 280
  - 283
  - 285
  - 288
- 290～295
  - 290
  - 295
- 300
- 310～315
  - 310
  - 315
- 320
- 340～345
  - 340
  - 345
- 350
- 370
- 390～395
  - 390
  - 395
- 400
- 420
Drawing

Clear

Torsion Angle (θ)
Clear

Base Blade Y/N
- Available
- None
Clear

Underneck length (ℓ1)(mm)
10

12

14

17

22

23

27

28

29

37

38

40

44

45

46

48

49

50

53

54

56

58

60

62

64

65

66

70

72

75

80

88

90

95

100

112

113

115
Drawing

Clear